Deburred LH and RH fuselage side panels and countersunk wing mount angle holes then re-clecoed into place onto fuselage. Deburred, dimpled, and countersunk aft spar tunnel web and clecoed back onto side panels as separate pieces. Riveted aft spar tunnel using flush rivets. Deburred and clecoed upper and lower forward cross ties into place. Deburred firewall components and clecoed into place. Disassembled forward Zee tunnel and dimpled/countersunk all holes per plans. Riveted spacer plates into place per plans but left wing attach angles clecoed. Fit forward tunnel zee onto fuselage, checked alignment, and clecoed to side panels. Riveted side panels onto fuselage and installed bolts and screws through splice plates. Installed bolts through upper cross tie and upper motor mounts. Riveted lower firewall onto fuselage and riveted firewall stiffener and top angle into place.
Hours Worked: 6.69
Leave a Reply