SNB-D03: Canopy Components
-
Canopy Components – Part 2
Took SNB-D03-09L and updrilled holes per plans; inside holes to 3/16″ and outside holes to 13/64″ to be tapped. Countersunk 3/16″ holes for flush screws and tapped outside holes with 1/4″-28 tap set for canopy alignment pins. Hours Worked: 0.64
-
Canopy Components – Part 1
Began canopy/windshield frame prep by working on canopy forward aft bows and windshield bow. For canopy bows, started by countersinking bow holes for -6 flush rivets. Riveted components together using -6 solid rivets. Laid out bows on workbench and marked centerline on bows. Measured out pilot hole locations for attach screws per plans and pilot…