SNX-T06: Horizontal Tail
-
Elevator Horn Re-do – Part 3
Verified flatness and squareness of elevator assembly on workbench then final drilled inboard elevator ribs using existing holes in elevator skin. Disassembled, deburred, then riveted elevators together. Hours Worked: 1.27
-
Elevator Horn Re-do – Part 2
Located new inboard elevator ribs onto elevator horn per B model plans; made sure horn was all the way forward on ribs to increase uptravel limits. Drilled new holes in ribs from existing elevator horn. Disassembled and debuted holes in elevator ribs. Located and transfered holes for trim cable bracket to new rib (even though…
-
Elevator Horn Re-do – Part 1
After some reflection on the slight shortcoming of up elevator travel, it was decided that the elevator horn should be removed and repositioned slightly forward to enable more up-travel. While the existing elevator horn will be retained the inboard elevator ribs will be removed and replaces so that the horn can be located more forward…
-
