SNB-W03: Ailerons
-
Aileron Tip Ribs – Part 2
Due to geometry of SNB version of tip rib, fabricated .032″ spacer and installed in between tip rib and forward part of RH aileron skin. Up drilled RH aileron tip rib and riveted to RH aileron assembly. Used rotary tool to slightly enlarge counterweight opening in RH rear spar. Scotchbrited and acetoned RH completed RH…
-
Aileron Tip Ribs – Part 1
Was able to save W04-10L tip rib from previous work and use strap duplicator to mark hole locations in new spots in aileron skin. Up drilled, deburred, and riveted LH aileron tip rib onto LH aileron assembly. Die grinded stained spots on LH aileron skin then scotchbrited and cleaned LH aileron assembly. Temporarily installed aileron…