SNX-W16: Aft Ribs
-
Wing Rib Prep – Part 4
Finished up drilling and riveting gussets to aft ribs #1 – #4. W16 complete! Hours Worked: 1.70
-
Wing Rib Prep – Part 3
Began up drilling -01 through -04 ribs with gussets and finished riveting cut end of -01L Hours Worked: 1.05
-
Wing Rib Prep – Part 2
Finished making -07 gussets and proceeded to prep aft wing ribs. All ribs prepped minus #9 aileron bell crank ribs. Test fit all ribs to spars and fit looks good; needed to do some slight trimming of -05 ribs to clear spar caps. Ribs #1 – #4’s gussets clecoed in place and need to be…
-
Wing Rib Prep – Part 1
Began preparation of the aft wing ribs. Traced template of -07 and -08 gusset and transferred to .025″ sheet to cut out. Bends formed via vice and small mallet. -08 gussets completed. Hours Worked: 3.27