SNX-WC02: Main Spar Conversion
-
Main Wing Spar Mating – Part 2
Inventory of Aircraft Spruce order and installation of the final rig plate bolt in the RH spar. W08 now complete Hours Worked: 0.74
-
Main Wing Spar Mating – Part 1
Mated spars together and up drilled alignment holes to 1/4″ per plans. Spars temporarily fastened together with AN4 hardware to drill wing attachment blocks. Holes drilled with drill press on ground and leveled by using 3/8″ bit and drill guide, then 15/32″ bit and finished with 1/2″ reamer. Both holes have give slight resistance when…