1.5×0.190×10.25 Bar
-
Rudder System Prep – Part 2
Removed forward fuselage floor for better access to rudder pedals then removed rudder pedals and mounting blocks. Used die grinder to remove powder coating from pivot points on rudder pedals. Created cable adjusters from aluminum bar stock. Hours Worked: 1.62
-
Rear Spar Carry Through Assembly
Created F03-02, F03-05L/R, F03-08 and -04/-07 spacers from legacy plans using angle and channel stock on hand. Clecoed together -01 rear spar carry through assembly together then updrilled all holes. Disassembled part and prepped parts for final assembly. Assembled all parts with rivets and AN3 hardware. F03 complete! Hours Worked: 6.65
-
Forward Fuselage Part Prep – Part 1
Creation of miscellaneous F10 parts from legacy plans from angle stock, bar stock, and aluminum sheets. Hours Worked: 4.65