JSX-D02-13
Fuselage Floors – Part 2
Began final installing fuselage floors by installing AN525 hardware in the forward lower engine mounts, the aft splice plates, and the tailwheel mount bulkhead. Final installed antennas, autopilot servos, seat pans, fuselage side panels, and seats. Began riveting aft fuselage. Replaced missing canopy alignment pin and added locknuts to cover protrusions and potential of pins…
Canopy Frame Installation
Began assembling canopy frame to fuselage by locating canopy frame hinge on RH longeron. Since clecoes would impede placing the canopy frame on the hinge, installed three rivets in the canopy frame hinge to make it easier to remove (if needed later on). Placed canopy frame onto fuselage and aligned it 1/2″ from the turtle…
Fuselage Conversion Kit Inventory – Part 1
Partial inventory of Sonex fuselage conversion kit Hours Worked: 3.43
