SNB-C02-03R
-
Rudder Control System – Part 1
Installed rudder pedals and mount blocks into fuselage. Applied white lithium grease to rudder pedals before tightening rudder pedal mount blocks. Fed rudder cables through aft fuselage and temporarily installed AN23 clevis pins into rudder horn. Installed cable fairleads into fairlead blocks. Bolted cable adjusters onto rudder pedals and marked LH cable adjuster hole per…
-
Rudder System Prep – Part 2
Removed forward fuselage floor for better access to rudder pedals then removed rudder pedals and mounting blocks. Used die grinder to remove powder coating from pivot points on rudder pedals. Created cable adjusters from aluminum bar stock. Hours Worked: 1.62