SNB-F15-03R
-
Fuselage Side Panels – Part 5
Disassembled RH forward side panel and deburred/cleaned all parts. Clecoed assembly back together and installed rivets per plans. Installed AN525 hardware as called out in plans and torqued to spec. F12-01R complete. Hours Worked: 3.97
-
Forward Fuselage Part Prep – Part 3
Created -05 support angles from .063 sheet and legacy plans. Located them onto -04L/R rudder pedal mount angles per plans and riveted with CCC rivets to create -03L/R assemblies. Cut 2.5×2.5×0.125 angle to create -12L/R angle clips and pilot drilled to 1/8″. Edged rounded on angle clips. F15 complete! Hours Worked: 2.68