SNB-F18-04L
-
Tail Cone Box Wrapup
Riveted turtledeck assembly to fuselage tail cone box per plans revision E. Up drilled holes through side skins and upper splice plates to 3/16″ and installed AN525 hardware. Torqued to spec. Clecoed crosstie closeout plate into place and riveted into place. Clecoed flap motor actuator mounts into place and verified alignment with flap drive tube…
-
Fuselage Conversion Kit Inventory – Part 1
Partial inventory of Sonex fuselage conversion kit Hours Worked: 3.43