SNB-W04-06R
-
Aileron Tip Ribs – Part 2
Due to geometry of SNB version of tip rib, fabricated .032″ spacer and installed in between tip rib and forward part of RH aileron skin. Up drilled RH aileron tip rib and riveted to RH aileron assembly. Used rotary tool to slightly enlarge counterweight opening in RH rear spar. Scotchbrited and acetoned RH completed RH…
-
Aileron Hinge Replacement
Examined RH aileron assembly. Determined that aileron hinge half was not to plan and was improperly aligned with top edge. Drilled out hinge half and replaced with new hinge using strap duplicator to match holes. Leveled assembly on work bench and finished riveting on counterweight supports. Partially completed aileron assembled to wing and checked freedom…