SNB-W05-02
-
LH Wing Assembly – Part 11
Deburred LH flap and aileron hinge halves and clecoed into place. Clecoed top of LH forward wing skin into place then flipped wing and ratcheted lower side into place. LH root doubler clecoed into place on top. Clecoed lower side into place. Re-flipped LH wing and riveted upper aft and upper half of forward wing…
-
LH Wing Assembly – Part 5
Created W05-02 and W03-02 hinge halves from M3 piano hinge and pilot drilled/clecoed to LH wing. LH doubler clecoed onto wing and holes for root rib drilled into wing skins. Forward most row of lower forward skin holes pilot drilled and clecoed into place. Hours Worked: 2.49
-
RH Wing Assembly – Part 10
Finished dimpling forward wing skin and moved onto riveting RH upper and lower aft wing skins into place. Did not rivet row on main spar or rows where root doubler will be. Hours Worked: 3.88
-
RH Wing Assembly – Part 6
Trimmed fiberglass tip rib per supplemental instructions and clecoed into place. Did not fasten to main spar support angle but riveted to rear angle. Little bit of a gap on upper part of leading edge to be fixed with fiberglass at a later time. Created aileron and flap hinge halves and clecoed into place. Discovered…