SNX-F23-05R
-
Fuselage Box Assembly – Part 10
Riveted upper cross tie #2 to vertical channels and upper cross tie box to vertical channels #1. Fit cross tie splice plates to upper splice plates via AN3 bolt holes and riveted plates to cross tie box. F21 complete! Hours Worked: 0.67
-
Aft Fuselage Part Prep – Part 2
Creation of F23 miscellaneous parts per legacy plans. Made -02 bulkhead from .032 sheet rather than blank due to not knowing it was available until it was too late. Channel cut with hole cutter. -03 and -04 angles cut on bandsaw, bent to 95 degrees, and holes cut with step bits. -05L/R mount assembly parts…