SNX-F24-07
-
Fuselage Box Assembly – Part 10
Riveted upper cross tie #2 to vertical channels and upper cross tie box to vertical channels #1. Fit cross tie splice plates to upper splice plates via AN3 bolt holes and riveted plates to cross tie box. F21 complete! Hours Worked: 0.67
-
Aft Fuselage Part Prep – Part 1
Cut Z04-02 cross tie stock to create upper and lower cross ties. Radius’ in lower cross ties made with 1/4″ drill bit. Used legacy plans to create cross ties; no pilot holes drilled. Cut Z04-03 for lower Cross Tie #1 Hours Worked: 4.20