SNX-G01-20

Drilled hole in fuel tank for fuel vent “oops” fitting then deburred/cleaned. Temporarily installed fuel tank straps and fuel tank then marked location of fuel tank vent on glareshield with strap duplicator. Removed fuel tank and drilled slightly oversized clearance hole in glareshield. Rinsed tank thoroughly with water then installed temporary brass plugs in bottom…

Located main drain hole in fuel tank and drilled opening with spade bit. Deburred edges with file and sandpaper then used wire trick to install “oops” fitting. Drilled fuel sender hole two inches over with step bit and deburred hole. Installed fuel sender oops fitting into tank. Hours Worked: 0.97