SNX-W15-05
-
LH Wing Rib Assembly – Part 4
Completed assembly of LH wing rib installation by prepping and riveting forward and aft ribs #6 – #12. Rear spar deburred, cleaned, and riveted to rib assembly. LH aft root rib riveted to rear spar. Hours Worked: 3.49
-
LH Wing Rib Assembly – Part 3
Attached W17-01L assembly to main spar. Bolt direction altered from plans to account for rivet interference. Starting inboard and working outboard, attached forward and aft ribs 1-5 to main spar and riveted into place. Forward ribs scotchbrited, acetoned, deburred, and dimpled. Aft ribs scotchbrited, acetoned, and deburred. Aft-most lightning holes in forward ribs upsized to…
-
RH Wing Rib Assembly – Part 3
Took apart RH wing box down to spars. Deburred and cleaned both main and rear spar. Began assembling wing ribs starting from #12 and working inboard. Deburred all holes in both forward and aft ribs, scotchbrited scratches, and cleaned with acetone. Forward ribs had holes dimpled for forward skin. Forward/Aft ribs #3-#12 complete. Lightning holes…
-
Wing Rib Prep – Part 6
Finished riveting -03 and -04 forward ribs. Hours Worked: 0.55
-
Wing Rib Prep – Part 5
Finished up trimming, match-drilling, and deburring -03 and -04 ribs. Still need to rivet. -08 and -09 forward root ribs completed Hours Worked: 2.53
-
Wing Rib Gussets
Determined pre-existing -06 and -07 gussets were from outdated plans and needed to be scrapped. New -06 and -07 gussets cut, drilled, and bent from template using scrap .025 sheet. Finished trimming -01 and -02 forward ribs and clecoed to spars. Hours Worked: 5.37
-
Initial Kit Inventory – Part 2
Inventory most of kit. Still need to organize tools and parts in small boxes Hours Worked: 8.50