SNX-W16-05
-
LH Wing Rib Assembly – Part 3
Attached W17-01L assembly to main spar. Bolt direction altered from plans to account for rivet interference. Starting inboard and working outboard, attached forward and aft ribs 1-5 to main spar and riveted into place. Forward ribs scotchbrited, acetoned, deburred, and dimpled. Aft ribs scotchbrited, acetoned, and deburred. Aft-most lightning holes in forward ribs upsized to…
-
RH Wing Rib Assembly – Part 3
Took apart RH wing box down to spars. Deburred and cleaned both main and rear spar. Began assembling wing ribs starting from #12 and working inboard. Deburred all holes in both forward and aft ribs, scotchbrited scratches, and cleaned with acetone. Forward ribs had holes dimpled for forward skin. Forward/Aft ribs #3-#12 complete. Lightning holes…
-
Wing Rib Prep – Part 3
Began up drilling -01 through -04 ribs with gussets and finished riveting cut end of -01L Hours Worked: 1.05