SNX-W21-01R
-
RH Wing Rib Assembly – Part 3
Took apart RH wing box down to spars. Deburred and cleaned both main and rear spar. Began assembling wing ribs starting from #12 and working inboard. Deburred all holes in both forward and aft ribs, scotchbrited scratches, and cleaned with acetone. Forward ribs had holes dimpled for forward skin. Forward/Aft ribs #3-#12 complete. Lightning holes…
-
Aileron Bellcranks – Part 5
Used Loctite 638 retaining compound to hold Symmco bearings into place; worked very well. Assembled together angles to create pivot assembly then added -10 bell crank assembly and completed final riveting onto -01R to complete #9 rib assembly. Will let Loctite harden before greasing with white lithium per plans. Hours Worked: 1.71