SNX-Z02-03 (96)
-
Rear Spar Carry Through Assembly
Created F03-02, F03-05L/R, F03-08 and -04/-07 spacers from legacy plans using angle and channel stock on hand. Clecoed together -01 rear spar carry through assembly together then updrilled all holes. Disassembled part and prepped parts for final assembly. Assembled all parts with rivets and AN3 hardware. F03 complete! Hours Worked: 6.65
-
Firewall Prep – Part 2
Creation of -02L/R, -04L/R, -07L/R, -11L/R, and -12L/R per legacy plans out of aluminum angle stock. Hours Worked: 5.96
-
Turtledeck Prep – Part 1
Creation of -07 skin spar channel and -10, -11, and -12 clips from channel stock per legacy plans. Channel stock cut with snips and pilot holes drilled per plans Hours Worked: 2.50
-
Fuselage Box Part Prep
Creation of miscellaneous aft fuselage parts per legacy plans by cutting angle stock, drilling pilot holes, and riveting -02 aft shear web assembly. -07 spacers relocated from Box 1 to WB-3L. Hours Worked: 2.48
-
Aft Fuselage Part Prep – Part 2
Creation of F23 miscellaneous parts per legacy plans. Made -02 bulkhead from .032 sheet rather than blank due to not knowing it was available until it was too late. Channel cut with hole cutter. -03 and -04 angles cut on bandsaw, bent to 95 degrees, and holes cut with step bits. -05L/R mount assembly parts…
-
Initial Kit Inventory – Part 2
Inventory most of kit. Still need to organize tools and parts in small boxes Hours Worked: 8.50