Stick Grip Modification

Opted to modify internal wiring inside the Ray Allen G403 stick grips in order to isolate PTT ground from other function ground. Removed screws in stick grip in order to remove circuit board from plastic housing. The default wiring is set up so that all functions share a common ground and the momentary/latched toggle switch functions are on separate wires. Since I wanted both switch positions to activate the smoke system, I de-soldered the separate white/orange wire from the toggle switch and soldered it to the PTT switch in order to create a separate, isolated ground path for the PTT function. Repeated soldering work on the opposite stick grip then applied function labels to stick grips.

Hours Worked: 1.04