SNB-F04: Seatbelt Installation
Seatbelt Installation – Part 2
Updrilled shoulder harness attach points to 5/16″ and bolted seatbelt shoulder harnesses with AN5 hardware. Applied torque seal to bolts. Hours Worked:0.42
Seatbelt Installation – Part 1
Began seatbelt installation by placing AN5 bolts in center seatbelt channel with grabber extension. Wrapped chrome ends of lap belts in painters tape to prevent scratching. Followed plans and placed buckle ends of seatbelt on inside. Set approximate lap belt angle and tightened AN5 hardware. Repeated process for outside belts. Marked all four seatbelt bolts…
