SNX-F24: Cross Ties
-
Aft Fuselage Part Prep – Part 5
Up drilled crosstie box cover and crosstie box. Also up drilled flap motor mount holes on bottom of crosstie box cover plate. Left flap drive mount holes on back of crosstie at 3/32″ as they will not be used. Hours Worked: 1.05
-
Aft Fuselage Part Prep – Part 4
Used F26-05 crosstie plates to pilot drill four new holes in cross tie channel per B-Model plans. Hours Worked: 0.38
-
Aft Fuselage Part Prep – Part 1
Cut Z04-02 cross tie stock to create upper and lower cross ties. Radius’ in lower cross ties made with 1/4″ drill bit. Used legacy plans to create cross ties; no pilot holes drilled. Cut Z04-03 for lower Cross Tie #1 Hours Worked: 4.20