SNB-P14: Battery Box
-
Battery Box – Take 2
Second attempt at making battery box by recutting out template from 0.032 sheet stock and bending with bench bender. Deviated from plans design by omitting LH side panel to be replaced with hinged panel for side removal of battery. Cut various lengths of -3 piano hinge and riveted hinge halves to battery box using flush…
-
Battery Box – Take 1
Measured out ETX900 battery to make flat sheet template for cutting battery box. Added 1/4″ to depth to account for edge of piano hinge on LH side. Drilled corner relief holes and mounting rivet holes then cut flat template with Andy snips. Bent flat sheet with bench brake then realized bends were going wrong direction…