AN363-1032
-
FWF Wiring – Part 1
Continued working on firewall forward wiring by making battery cables for master relay, starter relay, and amp shunt. Created ground cable for engine and attached to engine mount plate bolt then secured cable to engine mount with adel clamps. Hours Worked: 2.75
-
Rudder Control System – Part 1
Installed rudder pedals and mount blocks into fuselage. Applied white lithium grease to rudder pedals before tightening rudder pedal mount blocks. Fed rudder cables through aft fuselage and temporarily installed AN23 clevis pins into rudder horn. Installed cable fairleads into fairlead blocks. Bolted cable adjusters onto rudder pedals and marked LH cable adjuster hole per…