AN526C-632R6
-
LH Wing Wiring
Drilled passthrough hole in LH tip web and installed Heyco 2030 snap busing. Installed left wing wiring harness for tip and landing light. Created connectors LW01 and LW02 (DT style) and wired landing light. Landing light ops check good. Wrapped wiring harness near outboard vertical stiffener with shrink tube and placed tape on stiffener to…
-
RH Wing Wiring
Created grounding lug in RH Rib #12 for tip light and landing light. Created RH wing wiring harness and routed through snap bushing in lightning holes and tubing support plates. Created new hole in main spar tip web to relocate connector aft of main spar. Maintenance loops created in pitot wiring harness and landing light…
-
Pitot Mount Prep – Part 3
Nut plates installed on Pitot mount. Pitot controller remounted to #4 rib with 632R6 screws. Pitot tube mocked up in bracket and lines bent to offset connections above inspection plate. Tygon tubing ran through support plates. White indicates pitot line and yellow indicates AOA line. Pitot tube mount screws still need to be drilled and…