SNB-F07-02
-
Panel and Glareshield Wrap up
Installed rivets between panel blank and cross tie fittings. Riveted lower control angle for throttle, mixture, and trim onto lower edge of panel blank. Installed temporary #6 screws into panel blank then flush riveted panel to angles. Then riveted panel angle to front of glareshield. Notched out small area on right side of glareshield for…
-
Instrument Panel Prep
Marked and bent -05 and -09 angles. Located -05 instrument Panel angles to back of instrument Panel and drilled/clecoed. Will install final rivets and dimple once panel is cut out. Hours Worked: 1.88