SNB-W03-01L
-
Final Wing Assembly
Removed wings from wing stand and set onto saw horses. Assembled aileron push rods and filed thrust bearings down for 0.01″ clearance between bushing and bell crank plate and installed assembly onto LH aileron. Slightly enlarged counterweight opening in rear spar for bolt clearance then attached LH aileron to wing with piano hinge rod. Drilled…
-
Aileron Tip Ribs – Part 1
Was able to save W04-10L tip rib from previous work and use strap duplicator to mark hole locations in new spots in aileron skin. Up drilled, deburred, and riveted LH aileron tip rib onto LH aileron assembly. Die grinded stained spots on LH aileron skin then scotchbrited and cleaned LH aileron assembly. Temporarily installed aileron…