SNB-W03-01R
-
Final Wing Assembly
Removed wings from wing stand and set onto saw horses. Assembled aileron push rods and filed thrust bearings down for 0.01″ clearance between bushing and bell crank plate and installed assembly onto LH aileron. Slightly enlarged counterweight opening in rear spar for bolt clearance then attached LH aileron to wing with piano hinge rod. Drilled…
-
Aileron Tip Ribs – Part 2
Due to geometry of SNB version of tip rib, fabricated .032″ spacer and installed in between tip rib and forward part of RH aileron skin. Up drilled RH aileron tip rib and riveted to RH aileron assembly. Used rotary tool to slightly enlarge counterweight opening in RH rear spar. Scotchbrited and acetoned RH completed RH…