SNB-W05-01R
-
Final Wing Assembly
Removed wings from wing stand and set onto saw horses. Assembled aileron push rods and filed thrust bearings down for 0.01″ clearance between bushing and bell crank plate and installed assembly onto LH aileron. Slightly enlarged counterweight opening in rear spar for bolt clearance then attached LH aileron to wing with piano hinge rod. Drilled…
-
Flap Rebuild – Part 6
After completion of the drive rib assemblies, reclecoed assemblies together and completed final riveting. Flaps installed onto wings and appear to fit well. Hours Worked: 1.87