SNB-W07-01L
-
Final Wing Assembly
Removed wings from wing stand and set onto saw horses. Assembled aileron push rods and filed thrust bearings down for 0.01″ clearance between bushing and bell crank plate and installed assembly onto LH aileron. Slightly enlarged counterweight opening in rear spar for bolt clearance then attached LH aileron to wing with piano hinge rod. Drilled…
-
LH Wing Assembly – Part 12
Finished riveting lower side of LH wing including aft and forward skins. Installed aileron bell crank inspection cover plate using PK screws. LH wing complete! Hours Worked: 1.33