SV-NET-SERVO
Autopilot Wrap-up and Smoke System Wiring
Finished wiring auto pilot harness. Calibrated servos through the SkyView menu but when the auto pilot test was conducted, the pitch servo could be heard slipping consistently. Took video and sent to Dynon support. Talked with Steven from Dynon Support who informed me that the servos might not be able to move the flight controls…
Autopilot Installation – Part 2
Attached D-sub connector to roll servo wires then installed servo onto fuselage floor. Attached aileron servo push rod and verified servo arm did not contact over center bracket. Roughed in location of pitch servo and marked bracket location on floor. Removed pitch servo and installed Dynon-provided stiffener on floor. Installed servo onto bracket, installed over-center…
