VPE-11331
-
Fuel System Plumbing – Part 3
Installed 45 degree and AN fitting after fuel cube using Teflon paste. Cut a piece of solid aluminum fuel line to length and used tubing bender to bend into shape. Installed tube nut hardware on hardline and used flaring tool to flare ends of hardline. Installed hardline in between fuel flow cube and bulkhead fitting.…
-
Fuel System Plumbing – Part 1
Began plumbing the fuel system starting at the fuel tank. Used liquid teflon on all NPT threads. Made short run of fuel hose to go to bulkhead fitting. Had success creating fuel line by cutting line with cable snips and using zip tie around end to prevent jacket fraying. Marked firewall pass through location: will…