Riveted formers #5 through #2 to turtledeck skin starting at upper longerons and moving towards the skin splice channel. Riveted lower #1 formers to back of cross tie box then riveted upper #1 formers to turtledeck skin assembly. Riveted F20-08 splice plate to upper skin splice channel and #1 formers. Wrapped up #1 former section by riveting lower formers to upper formers and former straps. Up drilled F27-07L/R for AN3 hardware then rough bent forward end to match former angle. Installed AN3 hardware through former clips, upper longerons, and crosstie angles and torqued to spec. Slightly adjusted bends of tabs then pilot drilled and clecoed clips to upper and lower formers. Up drilled and riveted clips to formers. F19 complete!
Hours Worked: 5.30
Leave a Reply