Conducted flight test card C and D along with high speed taxi test to verify AeroInjector tuning and ability for engine to generate static RPM. After letting engine parameters stabilize, recorded data for test card C and testing mixture, fuel valve, and magneto shut-off methods. With help from Hannah, performed wet compass deviation check and Dynon compass calibration by taxiing over to area away from hangars. Positioned aircraft on each 30 degree heading verified by person outside the aircraft holding a compass and recorded magnetic compass indication. Calibrated Dynon on cardinal headings at the same time. Also took measurements for turning radius diagram. F01 task and aircraft build now complete!
Hours Worked: 2.09
Leave a Reply