Prepped glareshield for cover installation by scotchbriting surface then cleaning with paint prep. Blew debris off glareshield then laid fabric on top of glareshield and rough cut edges. Sprayed 3M Super 77 adhesive onto half of glareshield then rolled fabric flat. Repeated the process for the right side of the glareshield then rolled entire area flat. After letting adhesive set for a few minutes, fined trimmed fabric with exacto knife then used a putty scraper to tuck fabric neat. Installed weatherstripping onto glareshield edges to clean up look. Poked holes for compass through bottom of glareshield then installed MCDN-2L compass onto glareshield.
Hours Worked: 1.55
Leave a Reply