Clecoed forward fuselage floor back onto fuselage to start under seat component layout. Made riser mounts for ADSB, transponder, and com boxes so that nutplates could be used out of scrap aluminum. Riveted mounts to fuselage floor behind seat pan and bolted SV-COM-T25, SV-ADSB-472, and SV-XPNDR-261 units into place. Drilled holes for transponder and ADS-B antennas in back corners of forward floor and installed antennas into place. Located com antenna directly behind spar tunnel on fuselage centerline and checked for clearance with elevator pushrod. Drilled mounting holes per Rami template then bolted COM antenna into place.
Hours Worked: 4.52
Leave a Reply