Workshop Prep

Built paint hangar stands for hanging control surfaces during painting out of scrap 2×4, 4×4, and 3/4″ EMT. Hours Worked: 1.27

Built a rolling shelving unit and new mobile workbench for the hangar in preparation of moving the fuselage to the hangar. Hours Worked: 5.15

Assembly of Harbor Freight engine hoist and small stool Hours Worked: 1.75

Creation of wing stand from builders association plans Hours Worked: 2.42

Creation of wing support stands. Rear spar pillar is 3″ high with 10 degree slope. Main spar pillar is 1.5″ high with 5 degree slope. Pads carpeted to protect skin Hours Worked: 0.83

Creation of workbench extender to add 4 feet to current workbench. Attaches via (2) 1/2″ bolts and is removable Hours Worked: 1.72

Reorganize hardware into new storage solution Hours Worked: 4.22