AN525-10R8
-
Mixture Cable Install
Installed mixture cable into center panel section and routed cable through previously installed cable safe. Measured out approximate length and removed inner cable from jacket (making sure to carefully catch ball in cable mechanism). Trimmed outer jacket then upsized cable hole in AeroInjector to 1/4″. Installed AeroInjector back onto back side of motor and ran…
-
FWF Wiring – Part 1
Continued working on firewall forward wiring by making battery cables for master relay, starter relay, and amp shunt. Created ground cable for engine and attached to engine mount plate bolt then secured cable to engine mount with adel clamps. Hours Worked: 2.75