S12B
Intercom Harness Wiring – Part 2
Soldered shielded wire bundles onto copilot headset and passenger jacks. Installed both jacks on copilot side panel and routed wires to main intercom harness. Pinned connects at harness side then tested copilot side audio. Realized the the SkyView audio wires were routed under the throttle cable so had to unpin the four display wires and…
Intercom Harness Wiring – Part 1
Laid out aft cockpit panels on front formers and marked hole locations. Cut out mounting and component holes in formers, deburred, and riveted plates to fuselage. Measured out length of pilot side headset harnesses and cut three-wire shielded cable to length. Soldered harness onto headphone jack and used heat shrink to protect solder joints on…
